LUSTRE® ClearSkin Renew Pro Facewear is LUSTRE® ClearSkin’s first-generation Light beauty therapy mask that combines all the benefits of red, infrared and blue lights in one lightweight device, to energize and revitalize your skin for fresher looking skin and a youthful glow in the comfort of your home.
It comes with a compatible iOS/Android app that allows you to fully customize, track and plan your sessions for tailored results according to your needs.
he LUSTRE® ClearSkin Renew Pro Facewear Mask uses different light wavelengths, BLUE 440nm, RED 630nm and Infrared 830nm to provide proven skin care benefits in a non-invasive, chemical-free way.
Blue light (440nm)
Known for its effectiveness in killing acne-causing bacteria under the skin, blue light reaches where creams & lotions don't - and heals skin from within. Exposure to blue light spectrum triggers a photodynamic response with p.Acnes bacteria, which in turn effectively destroys them using your body’s own defence mechanism. This ultimately prevents bacteria ever reaching the surface of the skin, leading to a reduction in skin inflammation the natural way. The light’s ability to help balance sebum production also works for acne prevention.
Red light (630nm)
Red light therapy used in skincare contributes to tissue repair and has calming effects on damaged or sensitive skin. It promotes faster healing and supports smoother, younger-looking skin.
Infrared light (830nm)
This is the most deeply absorbed wavelength from all the other colours in the spectrum.
Infrared light used in skin treatment focuses on rejuvenation. In other words, it promotes the renewal of skin cells through the stimulation of collagen. Because it penetrates right into the skin, it is more effective in boosting its condition and repairing at the source, resulting in a plumper, more radiant complexion.
No pain should be felt whilst using LUSTRE® ClearSkin RENEW Pro Facewear. If you experience any discomfort, please stop using the mask and contact your healthcare practitioner.
The LUSTRE® ClearSkin Renew Pro Facewear is suitable for users with a Skin Type of I – VI on the Fitzpatrick skin type scale.
Fitzpatrick Skin Types V and VI can use the device, however we strongly recommend to assess your skin carefully after each session as there is an increased risk of pigmentation on those skin types
The LUSTRE® ClearSkin Renew Pro Facewear has 30 dual-core Red/Blue wavelength LED lights and 50 dual-core Red/Infrared wavelength LED lights (80 Dual-core LED lights in total):
• Red (630nm)
• Infrared (830nm)
• Blue (440nm)
LUSTRE® ClearSkin Renew Pro Facewear offers three (3) different setting modes:
• Revitalize mode (red setting)
• Energize mode (purple setting)
• Custom zone selection on four facial areas to fit your needs
Yes! While each LUSTRE® ClearSkin Renew Pro Facewear comes with a recommended pre-programmed skincare routine, you can personalize your sessions and experience by creating your own routine via the LUSTRE® Skincare app. You can choose your preferred program (REVITALIZE or ENERGIZE) on 4 different facial areas.
Yes! Light therapy has been studied and tested across hundreds of peer-reviewed clinical trials, with overwhelmingly positive results for skin health. It is pain-free and chemical free.
However, please do not aim or look directly into the lights. Doing so may cause temporary vision discomfort. Placement of the device should ensure that no part of the device is covering the eyes.
You may easily fit in a 10-minute session right after you wash and dry your face. The only important thing to remember is that your face should be clean before using the mask. Once the session is finished, you may proceed in applying a serum to your skin as desired!
One of the best things about the LUSTRE® ClearSkin Renew Pro Facewear is that you only need to use it once per day for the ENERGIZE mode and 5 times per week for the REVITALIZE mode. That's how great this mask is! For best results, we recommend that you do your 10 minutes session according to this protocol.
It depends on what skin concern you would like to take care of and your own skin type too.
With daily use, users will typically notice an improvement after just 30 days.
Whilst users typically see visible improvement of their skin, as well as improved skin tone and smoothness after 6 weeks.
LED light therapy has not been tested on pregnant or breastfeeding mothers, so we recommend that you do NOT use the device and/or check with your doctor or dermatologist.
Firstly, ensure the device is fully charged. Once it is, disconnect it and turn it on by holding the power button (located on the forehead) until indication LED turns solid.
Note: Always unplug the mask before use, the mask will not work while being charged.
Before your first session, perform a light sensitivity test:
1. Place the mask on the inner forearm. Switch on the mask for a full 10 minute cycle.
2. Don't look directly into the light, since it might be harmful to your eyes. Cautiousness is advised.
3. If your skin feels hot, unfomfortable, or itchy during the session stop immediately!
4. Wait until the session is fully completed. It will take 10 minutes to complete a full session.
5. The mask will automatically turn off after the session is completed. Remove the mask and wait for at least 6 hours.
Check your skin regularly over the six hours, if your skin appears red and/or itchy the mask is unsuitable for you. In the case of light sensitivity please contact your medical advisor or doctor.
Your first session:
Place LUSTRE® ClearSkin Renew Pro Facewear comfortably over the face, securing the strap around head
You can then select your sessions in 2 ways:
1. Pressing the power button multiple times to select the right program: ENERGIZE (purple) or REVITALIZE (red)
2. Or customize your session using the LUSTRE® ClearSkin App.
The LUSTRE® ClearSkin App can be downloaded on both the App store and Google Play. Once downloaded open the app and create your account.
Session will last 10 minutes and will turn off automatically.
Don’t forget to clean your face before using LUSTRE® ClearSkin Renew Pro Facewear and clean your mask gently with a slightly damp cloth after each use.
Yes. You can manually use your LUSTRE® ClearSkin Renew Pro Facewear without using the app. However if you wish to personalize your session and target different areas on your face, you will need to ensure the mask is connected to the LUSTRE® Clearskin app.
To choose/change a full program without using the app, follow the instructions below:
• Power on the device by holding the switch on button ( located on the forehead of the mask) until the red indicator light is on
• Press the button once for REVITALIZE program
• Press it again for ENERGIZE program
• Switch off the device by holding down the switch off button until the indicator light turns off
Plug the USB-C power/charging cord provided as part of your kit into the port connector of your LUSTRE® ClearSkin RENEW Pro Facewear, then plug it into a universal USB power adapter. The device is fully charged when the red power indicator light next to the charging port is turned off.
Note: Always unplug the device before use, the device will not work while being charged.
Wipe the inside with a damp cloth to remove any residue from skin oils after each use. Make sure the LUSTRE® ClearSkin Renew Pro Facewear is unplugged and turned off. Then use a damp, soft, or microfiber cloth to clean the facial area. Repeat until the LUSTRE® ClearSkin Renew Pro Facewear is clean and then dry with a clean dry cloth. Please only use water no soap.
A fast blinking red light indicates that your LUSTRE® ClearSkin Renew Pro Facewear is low in battery and needs to be charged. The red indication lights will blink slowly when the LUSTRE® ClearSkin Renew Pro Facewear is being charged.
We recommend to keep your LUSTRE® ClearSkin Renew Pro Facewear in a dry environment and always keeping your device in the luxury pouch provided when not using it. Usually, the bathroom is not the best place for keeping your LUSTRE® ClearSkin Renew Pro Facewear due to the heightened moisture in a bathroom.
Yes, light beauty therapy will not interfere with Botox. It is recommended to wait a minimum of 4 hours after receiving Botox before treating with LED at home.
Yes, LUSTRE® ClearSkin Renew Pro Facewear can be combined with more invasive treatments such as Botox, peels, injectables and laser resurfacing.
The LUSTRE® ClearSkin Renew Pro Facewear uses a rechargeable lithium-ion battery of 3.7V with 800 mAh. Please check the rules of your airplane company when travelling by air, rules for this product can differ per company.
A small number of people experience minor side-effects like minor skin irritation or redness. We recommend doing a skin sensitivity test prior to using the LED mask Details can be found in the user manual. If you experience any discomfort, side-effects, itch, or redness, please stop using the device immediately and consult your healthcare provider.
